Sewing is on this week’s agenda

I have to get 3 sewing projects completed in about a week. 2 dresses (for Maggie and Bridget) for the 4th of July and 1 superhero cape for Parker. He requested a cape for his birthday.

Here is the cape tutorial I am going to use.

 

Here is the dress tutorial I am going to use. I am a little nervous about the dress for Bridget. I am going to have make adjustments because she is almost ten and needs a much bigger size. Hope it turns out

I am going to get to use my craft table for the first time. I will actually get to leave the sewing projects out and not have to clean them up every night.

This table is made from the same barn wood. It is super heavy duty. Perfect for my craft projects.

Parker wanted in the picture

Our “new” headboard

A few months back when my Grandpa and I were collecting wood from the collapsed barn we collected enough wood to make quite a few pieces of furniture. I think we made a total of 4 trips, and we came home with AMAZING wood. There are some HUGE beams left that are probably 10x10s or 12x12s. I am keeping my eye on them and trying to determine if we should go get them and just save them.

After the light fixture and coffee table were completed, we moved onto some headboards. One for our room and one for Maggie’s big girl bed that she will use down the road (no where near ready to let her out of a crib).

I found a few examples of barn wood headboards online and on Pinterest. This one was my favorite and it came with some pretty good instructions:

My Grandpa, Dad and I brainstormed. We chose our wood, and pieced it all together. My dad had the idea to use the two posts we had chosen and route out some grooves for the headboard to slip into. It worked out perfectly. My grandpa put it altogether, and then we gave it 3 coats of Minwax Polycrilic (Satin finish).

Here is our finished product. The pictures really don’t do it justice. It is beautiful!

Up close:

Post:

I am looking forward to using Maggie’s twin headboard. It turned out just as beautiful! The wood is simply amazing, and is a piece of art all by itself. We enjoyed changing the bedding and some decorations to compliment the new headboard. It really brightened up our room. A much needed redo of our room!

Featured!

 

Well, I received a a fun e-mail this morning. Knock-Off Décor is featuring our light fixture tomorrow evening. It is exciting!

I love this website and I am currently working on a project that was featured last week. Lots a great DIY ideas in one place. Really nice things that you can make at for the fraction of the price you would pay if you purchased it from the retailer. You should take a look!

Knock Off Decor

I made my first submission to Knock Off Décor. It is a website where people submit their DIY versions of items from retailers such as Pottery Barn, Anthropologie, Crate & Barrel, etc. Often times the projects are completed for a much cheaper cost than what the retailer is selling them for.
People really can do some amazing things! It is fun and inspiring to see what other people are able to replicate. One of my friends encouraged me to submit my mason jar light fixture to the site. I forgot about it for a while, but I decided to give it a shot. We shall see if it actually gets posted

Coffee Table

I am not a huge fan of lots of furniture and knick knacks. It makes me feel kind of claustrophobic. We also have little children, so the more we have the more they can run into or destroy. However, we were in need of a coffee table. When we have people over, there was no place to put our drinks  food  in the Family Room. The kids needed a place to color and do homework. Abe needed a place to work at night. Maggie needed something to pull up on and walk around. It was time to look into a coffee table.

I started browsing Pinterest for ideas. The barn wood from other projects (here and here) came to mind. These ideas were really neat:

My favorite!! It had instructions as well which was very helpful. The only issue I saw was that it was a little too narrow. I loved the storage potential and the wheels. I wanted the boys to be able to roll the table out of the way, so they could wrestle with Daddy .

I emailed my Grandpa the website. He thought it was doable! We went and scoped out the wood pile, and found some nice pieces. He and my Dad went down the next day and found AMAZING wood. We measured and chose the dimensions we wanted. It was very rough and we were slightly concerned about splinters. He ended up planing the wood and made it very smooth. He used L-brackets and dals to make it very sturdy. We envisioned 3 little kids standing on the table . He worked very hard and about 3 weeks later the table was finished. We figured that the wood alone would have cost $300-500. I spent about $50 in supplies. I have no idea what you would pay for something like this, but it would be quite costly!!

Here is the finished product! It ended up being 48’x38’ and about 20 inches high. It is perfect for our family room. We use it all the time. So grateful for all my Grandpa’s labors!

Top:

Storage Area:

Side View:

DIY Mason Jar Light Fixture

Note:I am new to writing tutorials and taking pictures for them, so I didn’t get pictures of some the steps. I am sorry in advance. I am willing to answer questions if something is not clear or pictured.

 

Thanks to Pinterest I found pictures of mason jar light fixtures. I LOVED them! Apparently, Pottery Barn sold a light fixture with mason jars (here is the one they sold for $399!!) that people reproduced for much cheaper. Here is a picture of the Pottery Barn version.

There were 3 blogs with DIY tutorials that were very helpful. I thought this tutorial was the most helpful with supplies to purchase and electrical instructions. This blog was helpful for some electrical instruction as well and also a picture of one fixture using wood. They also show how to make a wooden box. I also used Kara Paslay’s tutorial for some help. After reading all three blogs, I came up with my own idea and list of supplies.

The first and most important item was the piece of wood. I envisioned a piece of barn wood from the same collapsed barn that we made this from:

I talked my Grandpa into going down to the collapsed barn, and we went to town collecting wood. With the help of his chain saw, we came home with quite the stash of amazing wood. We have collected some of the nicest wood from this place. In another post, I will show the amazing coffee table that he made from wood from this barn. Amazing! I will treasure the memories of this day and the times spent creating with my Grandpa. He loves to work, and is so creative with using scraps and odds and ends! Here are pictures from that day:

We picked our favorite piece of wood from the wood pile. We used his table saw to cut out a space for the wiring. We made numerous cuts with the saw, and then he chiseled out the wood. I didn’t get pictures of this step, but it worked out perfectly. He then used satin Minwax Polycrilic to seal the wood. The piece of wood ended up being about 54” long. We determined that we could hang about 7 jars. We took into account proper spacing so the jars wouldn’t touch each other and what we thought would look the best. Here is a picture of the wood with the sealant and space for wiring:

With a list in hand, I headed to Home Depot and Wal-Mart for the rest of the supplies. Here is a list of what we needed:

Home Depot:

21 feet of 18-2 Lamp Cord-Go to the electrical section, and they have bulk lamp cord. They will cut you the length that you need. I used about 26 inches of cord for the short lights and 32 inches for the longer lights you will also need some extra cord to connect the cords.

7 Keyless Lampholders/Sockets-this is what I ended up using. They are on the same aisle as the switches and such. They are box sold loosely. I think it was simpler that using the keyless socket as far as the wiring part and it also felt more secure as far as holding up the jar.

Electrical tape

Wire Nuts-I wasn’t sure about the size, so I bought the bag of miscellaneous sizes.

Wal-Mart:

7 Mason Jars-Quart Sized

Krylon Gray Spray Paint-I have found that Wal-Mart has the best price.

Other items you will need:

-Wire stripper and/or exacto knife

-Supplies to attach the fixture to the ceiling

-Drill

Step 1- Cut your lamp cord to your desired lengths:I wanted four jars that were longer and three that were shorter. You will need to leave some extra cord to tie and knot and connect some wires (approximately 6-8 inches).

Step 2-Spray paint the cord. The cord will take about 24 hours to dry

Step 3-Drill holes for lamp cord. I used a 5/16 drill bit for the holes. For my 54.5” board, I started the first hole at 7.5 inches and spaced the other holes about every 6 9/16”. Drill a total of 7 holes.

Step 4-Drill Holes in Jar Lids using the same drill bit used in Step 3. Use a smaller drill bit and drill 4 smaller holes to let heat out when the bulbs are turned on.

Step 5-Feed the cord through the Jar lid.

Step 6-Attach cord to the keyless lampholders. Separate the lamp cord about 4 inches with an exacto knife. Un-screw the lid of your lampholder.  You will see two little “cone-shaped” pieces of metal (one is silver and one is brass). These will “pierce” the wire to make the connection. I know very little about electrical, but I learned that you connect the HOT wire to the BRASS and the NEUTRAL wire to the SILVER.

Neutral wire has a ridged casing:

Hot wire has a smooth casing:

Insert the wire into the lampholder and screw down the lid very tight. This will puncture the plastic casing and make your connection:

 

Step 7- Split and Strip the Ends of Each Cord. Use an exacto knife to split the lamp cord about 1.5 inches. Use a wire stripper or exacto knife to remove about 1 inch of the plastic casing on each cord. (I waited until after the cord was knotted to do this step and it would have been easier to do this before)

Step 8-Feed Cords up the Drilled Holes. You want to determine at this point how low you want each jar to hang. Tie a knot on the end of the cord, so the cord will stay in place.

Step 9-Connect wires to the extra lamp cord and split and strip each end about 1 inch. I cut about 6 inch pieces of lamp cord. Split and strip each end of the cords. Use a wire nut to connect the hot wire of the 6 inch piece of lamp cord to the hot wire of the knotted cord. Do the same with the neutral wire. Remember-Hot to Hot and Neutral to Neutral. Repeat until you reach the end. The only exception is that for the middle cord I didn’t use a wire nut. I just twisted the wires together. These wires will be connected to the wires in your ceiling. (I wish I would have taken a picture, but I forgot. Some of the other blogs I posted showed some pictures of this step.)

Step 10-Test the lampholders to make sure they work. I am no electrician and neither is my dad who helped me. However, he has been in construction for 35+ years and knows some basics about electrical. He helped me at this point. We took a cord  with a plug on the end from an old lamp. We wired our fixture to the cord and plugged it in. We screwed in a light bulb to every lampholder to make sure they were wired correctly. We found that some of the lampholders didn’t have a proper connection. We needed to screw the lid on tighter to pierce the lamp cord. Eventually, they all lit up and we were ready to hang the fixture.

Step 11-Attach wiring and fixture to the electrical box. You probably want to call an electrician at this point. My Dad was able to do it, but I would NOT have been able to do this by myself. I will say that this fixture weighed about 22 pounds which is a proper weight to hang from the electrical box. We did not have to drill into our ceiling which was great! It worked out well, but it took 3 of us to finish. My husband and I held the fixture up while my dad did the wiring and installation.

Step 12-Attach light bulbs and mason jars. I did not buy the “wide-mouth” jars, so regular light bulbs would not fit inside my jar. I had to purchase these:

Step 13-Stand back and admire your finished light!!

I spent a little less than $40 on this project. It helped that I didn’t have to buy the wood, but I like that price much more than $400. This light fixture will definitely be coming with us when we move!! I LOVE it!

Coat Rack

I had been wanting a coat rack for our entry way. I wanted something that was functional, but at the same time decorative. The rustic farmhouse style has always been a favorite of mine. It would be so fun to live in a farmhouse (redone with modern day conveniences of course)! A girl can dream I love distressed wood, and so I started Googling “distressing wood.” Well, around the same time I started talking to my grandpa about helping me distress some wood for a coat rack. He mentioned that there was a collapsed barn down the road. We hopped in the car, climbed a fence, retrieved a pile of very distressed wood, and went back to his house.
I had so much fun creating this project with him I will never forget the making these projects with him. The memories are so dear to me. He is so creative and uses so much ingenuity. He can take what other people would consider trash and make treasures. Here is the treasure we came up with.

The only thing I purchased were the hooks and the hangers to hang it on the wall. I love it!